In a short span of time KANTAM has produced the largest range and sizes of injection moulded PVC fittings in the country. The fittings, are made from the highest grade quality resin. PVC fittings ensure easy installation, quick modifications as well as complete flexibility in constructing a piping system.
Kantam Rigid uPVC pipes are available in size of 20 to 400 mm and pressure rating of Class 1 to Class 6 (0.25Mpa2, 2.5 Kgf/cm2 to 1.25Mpa2, 12.5 Kgf/cm2) confirming to IS 4985 : 2000 as per application requirement.
Kisan Rigid uPVC Plain / Socketed / Firmseal pipes are used for various applications, some of its agricultural and allied applications are:
Bio Gas Plant
Drinking water supply lines
Main line for sprinklers / drip irrigation
Underground or open pipeline
Telecommunication cable ducting
Corrosion Resistant : Immune to galvanic or electrolytic erosion
Chemical and Biological Resistant: Resistant to acids, oxidizing agents, alkalis, oils and domestic effluents. Fit for high purity water applications
Easy Installation : Pipes of diameter less than 140 mm can be joined by hand pressure while for those of a larger diameter, a pipe jack is adequate
Lower cost of Installation : Lightweight therefore they are easy to transport and carry to the site
Flexibility :Can accommodate slight shifting of the soil, bending of the pipe up to 2 degrees per joint and tolerates small gradients in underground piping
Immediate Testing: Pipes can be tested for ability to withstand pressure immediately on completion of installation. There is no need to wait for the joints to dry, etc.
Maintenance Free : No painting or coating required
“Kantam” was found in 1980 and has been continually growing since then. “Kantam” is pioneer of pvc fabricated fitting in India. Beginning with modest plastic pipe fabricator. In 1985 Kantam went on to produce ISI foot valves, gate valves & threaded pipes & fittings.